curtis rosche
11-14-2008, 5:58 PM
here is what i am looking to get, for christmas and then my birthday 2 months after that.
the thompson 1/2'' V bowl gouge
http://www.thompsonlathetools.com/tooltype.asp?TYPE=BV (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.thompsonlathetools.com/tooltype.asp?TYPE=BV)
the handle 16" long - bored for a 3/8" tool
http://www.bowlturner.com/ (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.bowlturner.com/)
(mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.seriouslathe.com/woodturning-tools.php)
and the 2 attatchments to sharpen it.
http://www.oneway.ca/sharpening/vari-grind.htm (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.oneway.ca/sharpening/vari-grind.htm)
http://www.oneway.ca/sharpening/grind_jig.htm (http://www.oneway.ca/sharpening/grind_jig.htm)
is the sharpening thing the right one to get?
is there a cheaper place to get the sharpening set?
the thompson 1/2'' V bowl gouge
http://www.thompsonlathetools.com/tooltype.asp?TYPE=BV (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.thompsonlathetools.com/tooltype.asp?TYPE=BV)
the handle 16" long - bored for a 3/8" tool
http://www.bowlturner.com/ (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.bowlturner.com/)
(mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.seriouslathe.com/woodturning-tools.php)
and the 2 attatchments to sharpen it.
http://www.oneway.ca/sharpening/vari-grind.htm (mhtml:{4AFFA07C-444F-4458-8E76-DDAB8FBE4683}mid://00000035/!x-usc:http://www.oneway.ca/sharpening/vari-grind.htm)
http://www.oneway.ca/sharpening/grind_jig.htm (http://www.oneway.ca/sharpening/grind_jig.htm)
is the sharpening thing the right one to get?
is there a cheaper place to get the sharpening set?