Tactile letters on silver anodised

[Ian Rankin]

Hi all,
I may be in the wrong forum as I am cutting tactile letters using Romark ADA material applied to silver anodised using a rotary engraving machine . Its working fine but the adhesive is remaining on the anodised surface and it is a pain to remove. Any tips on how to approach this job.

Thanks in advance for any help.

Ian Rankin

[Mike Null]

Ian

GooGone should do the trick. Try cooking oil too.

The best stuff is this but it will attack some plastics rapidly. Such as microwave oven doors (how would I know that).

http://www.citrusdepot.net/

[Ian Rankin]

Mike
Thanks for prompt reply.

Regards
Ian

[Mike Null]

Ian

There may be a better way to do the job.

Try kiss cutting the plastic just down to the carrier. Weed it and apply transfer tape as if you were doing a vinyl sign. Lift the text from the carrier and transfer it to the aluminum as one piece. Use a squeegee to press it to the alum. Lift off the transfer tape.

No mess no cleanup.