john l graham
11-10-2008, 6:54 PM
Gavel is from some unknown wood that was left by the previous owner of the residence. It was done primarily with the skew. It was a bit small for the head but was limited by the size of the stock piece. Size: 10" x 4", BLO finish.
The mallet was made from some white oak that was glued together to get the four inch diameter. I made it because I needed a wooden mallet. Size: 10" x 3.5", BLO finish.
Thanks to all of you guys and gals for your helpfulness. It makes things lots easier for us just learning. John
The mallet was made from some white oak that was glued together to get the four inch diameter. I made it because I needed a wooden mallet. Size: 10" x 3.5", BLO finish.
Thanks to all of you guys and gals for your helpfulness. It makes things lots easier for us just learning. John