Samuel Brooks
11-08-2008, 5:47 PM
I have been working on this project for several months and have finally hit the home stretch. I learned how to veneer and have had allot of fun. New Drum Sander and Pin Nailer - Bonus :rolleyes:.
Hall Table Base
100547
Hall Table Top pending attachment of molding that will edge it.
100548
As you can see, I had to stretch the flaming birch after sanding and trimming tear-out I was a little short on the width so I decided to improvise, hence the racing strip.
This plan is from Woodsmith.
Thanks for looking.
Sam
Hall Table Base
100547
Hall Table Top pending attachment of molding that will edge it.
100548
As you can see, I had to stretch the flaming birch after sanding and trimming tear-out I was a little short on the width so I decided to improvise, hence the racing strip.
This plan is from Woodsmith.
Thanks for looking.
Sam