Scott Shepherd
11-06-2008, 10:01 AM
I need a rotary engraving cutter in a diameter than I cannot find and I need it fairly quickly. I have ordered a catalog size one that should have worked, but it actually cuts .004" smaller than it's size, and that causes me a problem for this application.
Anyone know a good source for the 1/4" shank, 6 1/4" long cutters where I can be specific about the sizes I need?
The ones I have came from Johnson Plastics and they are the one's that are undersized. I'm using this to plunge a hole, so I can't adjust anything, since the hole is formed by the diameter of the cutter.
Anyone know a good source for the 1/4" shank, 6 1/4" long cutters where I can be specific about the sizes I need?
The ones I have came from Johnson Plastics and they are the one's that are undersized. I'm using this to plunge a hole, so I can't adjust anything, since the hole is formed by the diameter of the cutter.