Heather Thompson
11-03-2008, 3:15 PM
Hello All,
Last Friday my new PC121 was delivered, I bought the aluminum plate from WoodPeckers last year and plan on using this in my router table setup. The 121 comes with a 2"x4 1/2" sanding drum and there is a seperate set of drums, 3/4", 1" and 1 1/2" avalible as an accessory kit (40.00 and no sanding sleeves). I checked with Sears and they have a similar product for about 15.00 dollars, the only problem is they are 1/2" too short :rolleyes:. My question is, does anyone know where I could source the rubber drums and sanding sleeves for a more reasonable price.
Heather
Last Friday my new PC121 was delivered, I bought the aluminum plate from WoodPeckers last year and plan on using this in my router table setup. The 121 comes with a 2"x4 1/2" sanding drum and there is a seperate set of drums, 3/4", 1" and 1 1/2" avalible as an accessory kit (40.00 and no sanding sleeves). I checked with Sears and they have a similar product for about 15.00 dollars, the only problem is they are 1/2" too short :rolleyes:. My question is, does anyone know where I could source the rubber drums and sanding sleeves for a more reasonable price.
Heather