Chuck Tringo
10-29-2008, 10:21 PM
Well, My Jet Sliding Table for Supersaw arrived today, funny thing though, I dont own a Supersaw, I have a Proshop :D The deal on amazon is/was $173, with my coupon I got it for 148....about 2-300 less than any other sliding table I could find, so I figured for that price, I could MAKE it fit, and of course, no instructions
In order: My saw last week.....under the rockler crosscut sled is a bench dog cast iron router table that got moved to the right side while the woodhave router table extension is put up for now, will make a stand alone table from it soon....then the box arrives...HEAVY, 88lbs worth, more Cast Iron....the marks on the front rail before drilling....the front bracket on.
The back rail is not low/wide enough to mount the rear bracket, so Im going to think about how to reinforce it/MAKE it fit, and hopefully will have completed pictures tomorrow or by the weekend at least.
In order: My saw last week.....under the rockler crosscut sled is a bench dog cast iron router table that got moved to the right side while the woodhave router table extension is put up for now, will make a stand alone table from it soon....then the box arrives...HEAVY, 88lbs worth, more Cast Iron....the marks on the front rail before drilling....the front bracket on.
The back rail is not low/wide enough to mount the rear bracket, so Im going to think about how to reinforce it/MAKE it fit, and hopefully will have completed pictures tomorrow or by the weekend at least.