Gabe Gat
10-28-2008, 11:33 AM
:(
Need some help Laser Gurus! I have a 50W. ULS-50PS. When I fire up my laser and the display is acting up, the cursor (black rectangle to the right of the display) is running up and down the screen very quickly and the menu items are out of place (some are further over on the right then usual, some are repeated on more then one line) I can't escape or select anything. I ended up sending the LCD panel and board to ULS but they sent it back to me saying all was well and they couldn't duplicate the issue on their machine. I've tried turning the system on and off, as well as unplugging waiting and turning it back on. I've checked all my connections from the LCD to the machine, I've even removed them, waited an hour then plugged everything back in?! I've been racking my brain for any changes I might have made all I can think of is it's getting colder in my garage, I know LCD's and such can be effected by this type of thing, I put a thermometer in the garage over night it gave me a reading of 17C. this morning. My Laser is water cooled and that's set at 20C.
I can still test fire the laser as well as move the X,Y position so I know that works.
Any advice?
Need some help Laser Gurus! I have a 50W. ULS-50PS. When I fire up my laser and the display is acting up, the cursor (black rectangle to the right of the display) is running up and down the screen very quickly and the menu items are out of place (some are further over on the right then usual, some are repeated on more then one line) I can't escape or select anything. I ended up sending the LCD panel and board to ULS but they sent it back to me saying all was well and they couldn't duplicate the issue on their machine. I've tried turning the system on and off, as well as unplugging waiting and turning it back on. I've checked all my connections from the LCD to the machine, I've even removed them, waited an hour then plugged everything back in?! I've been racking my brain for any changes I might have made all I can think of is it's getting colder in my garage, I know LCD's and such can be effected by this type of thing, I put a thermometer in the garage over night it gave me a reading of 17C. this morning. My Laser is water cooled and that's set at 20C.
I can still test fire the laser as well as move the X,Y position so I know that works.
Any advice?