Need Help Again

[Marty Rose]

My Son allowed me, a novice to cut down his T.V. Stand. It was five feet tall. It needed to be less than 24 inches. It was a sucess. Everything came out beatuiful, If I knew how to down load pictures I would, But I don't so I won't. While attempting to load it in his vehicle it became stuck he pulled it out,being an impatient youth. The top has a nick,in it now. Not as to where the wood is missing,but rather pushed in,a dent if you will. Can I use the old tried and true "WET CLOTH AND IRON" to pull out the dent or try somthing else. This is Hard Maple Solid Wood One Piece Top. I think next time he will allow us to deliver it to him in our truck.

[Lee Schierer]

Yes, but don't get the cloth too wet. If the finish clouds under the iron, once the dent is raised reheat the area with a dry towel and hot iron. That should remove the moisture from under the finish.