Mike Heidrick
10-07-2008, 12:37 AM
I recently assembled a Kreg Face frame clamping station with my Kreg Foreman beside it on the back of my JLT Panel Clamp rack. The foreman is inverted and the kreg table and face of the foreman are on the same plane. I can use the kreg blocks as stock supports for stock being drilled by the foreman. It is adjustable for different thicknesses of wood as well (the foreman fence moves for different wood thicknesses. This setup gives me support to about 8' to the left. To the right I will have telescoping supports coming out of the rack similar to those on a Miters Saw stand. It is all on the back of one of these:
http://i39.photobucket.com/albums/e169/BloomingtonMike/panelclamp.jpg
Now I can drill the pocket holes and clamp them up on the same wall. I may be adding a panel saw styled addition to it once the Dewalt Track Saw gets here (thanks Dewalt). Sorry the pics make it hard to see - I will try and get better pictures taken. It does not impeed the function of the JLT rack on the front either.
http://i39.photobucket.com/albums/e169/BloomingtonMike/panelclamp.jpg
Now I can drill the pocket holes and clamp them up on the same wall. I may be adding a panel saw styled addition to it once the Dewalt Track Saw gets here (thanks Dewalt). Sorry the pics make it hard to see - I will try and get better pictures taken. It does not impeed the function of the JLT rack on the front either.