View Full Version : Rubber Vector Settings???
Mark Koenig
10-05-2008, 2:09 PM
Anyone have some settins for cutting 3/32 (.093) thick rubber for a 75 watt Epilog EXT??? The settings in the book seems like a misprint...
Frank Corker
10-05-2008, 3:20 PM
For my 45 Watt Helix
20sp/100pwr at 300dpi
30sp/100pwr at 400dpi
40sp/100pwr at 600dpi
20sp/100pwr/100Freq
It will not be much different for yours. I would suggest an increase and make yours 40 60 an 80 on your speeds and 30 speed on your vectoring.
Mark Koenig
10-05-2008, 4:09 PM
What frequency???
Frank Corker
10-05-2008, 8:15 PM
Still 100 as above
John Noell
10-06-2008, 2:27 PM
For JMP rubber our 45 watt Mini takes 13sp/100pwr/300dpi and cuts at 7sp/1--pwr/100freq.
Mark Koenig
10-07-2008, 7:15 PM
The rubber was an 80 on the durometer...:mad:
5% speed, 100% Power, 500 Frequencey on a 75 WATT...
Got the job done thanks to the Board...:)
Thanks So MUCH!!!
Mark
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.