Tim Sproul
05-14-2004, 6:15 PM
I'm fairly new to the forum (as well as to woodworking - about a year now of serious time at it).....and got associated with SMC because I was tracking down Dave's striking knives....btw, I'm quite pleased Dave :) .
Many posts show the final product of one's endeavors...and many talk about this tool or that....so I thought I'd show a couple pics of some air-dried walnut I'm jointing and some of my lumber stacks (I'll wisper very quietly that I got the walnut for $1/bf :p ):
http://www.woodworkersweb.com/modules/gallery/albums/albur43/jointing_walnut_2.jpg
http://www.woodworkersweb.com/modules/gallery/albums/albur43/jointng_walnut.jpg
lumber:
http://www.woodworkersweb.com/modules/gallery/albums/albur43/air_dried_walnut.jpg
The walnut is obvious - very dirty but what do you expect for $1/bf?. On the right side...going top down is some amapola with white oak welded on...in the process of becoming drawer sides and backs. The walnut I'm jointing will be the fronts. Underneath the amapola is an 8/4 board of angico. Angico must be in the density of lignum vitae....HEAVY. Then some 8/4 amapola rough underneath the walnut. Left stack is few short boards of the drawer stock I'm prepping. Some 1x8 redwood fence boards - will be sawn into tomatoe sticks for holding up plants....(Lowes was closing them out at $2/board).
http://www.woodworkersweb.com/modules/gallery/albums/albur43/lumber_1.jpg
behind the MCP and OSB is more walnut...including a couple 6x8 x 8 - 10' timbers of black walnut. In the racks is a variety - white oak, red oak, hard maple, south american alder (????), madrone, euro beech, walnut, mahogany - s. macro, jatoba, bubinga, purpleheart, port orford cedar.
Many posts show the final product of one's endeavors...and many talk about this tool or that....so I thought I'd show a couple pics of some air-dried walnut I'm jointing and some of my lumber stacks (I'll wisper very quietly that I got the walnut for $1/bf :p ):
http://www.woodworkersweb.com/modules/gallery/albums/albur43/jointing_walnut_2.jpg
http://www.woodworkersweb.com/modules/gallery/albums/albur43/jointng_walnut.jpg
lumber:
http://www.woodworkersweb.com/modules/gallery/albums/albur43/air_dried_walnut.jpg
The walnut is obvious - very dirty but what do you expect for $1/bf?. On the right side...going top down is some amapola with white oak welded on...in the process of becoming drawer sides and backs. The walnut I'm jointing will be the fronts. Underneath the amapola is an 8/4 board of angico. Angico must be in the density of lignum vitae....HEAVY. Then some 8/4 amapola rough underneath the walnut. Left stack is few short boards of the drawer stock I'm prepping. Some 1x8 redwood fence boards - will be sawn into tomatoe sticks for holding up plants....(Lowes was closing them out at $2/board).
http://www.woodworkersweb.com/modules/gallery/albums/albur43/lumber_1.jpg
behind the MCP and OSB is more walnut...including a couple 6x8 x 8 - 10' timbers of black walnut. In the racks is a variety - white oak, red oak, hard maple, south american alder (????), madrone, euro beech, walnut, mahogany - s. macro, jatoba, bubinga, purpleheart, port orford cedar.