Follow up lathe at auction

[Skip Spaulding]

I went to the auction this morning, looked over Powermatic 45, not in bad shape, repainted, no accessories, 115 volt motor. Bidding started at $500. and ended at $1100.!! Needless to say I wasn't in the bidding.
I did pick up a Sioux 3/8" angle drill for bowl sanding.
I also got a 10 piece set of Lemco spindle chisels. They run from 3/8" to 11/4". Any info on the Lemco set would be great. I've tried the net but can't find much. The handles have LEMCO TOOL INC. Box 1664 Sedalia, MO. The blades have DIACCURATE TM the size 3/8 etc. and the pat. # U.S.PAT4345631. I don't turn a lot of spindles but for the price of less than one good bowl gouge I got a set of 10 hardly used spindle chisels!
Thanks, Skip

[Steve Schlumpf]

Skip - sounds like you walked away with some tools that you can use - so it was a good thing you went! I can understand why you didn't bid on the lathe!!! That's just nuts! IMHO

[Allen Neighbors]

And so it goes, at some auctions. Good you got the tools, though.

[Steve Clardy]

I went to the auction this morning, looked over Powermatic 45, not in bad shape, repainted, no accessories, 115 volt motor. Bidding started at $500. and ended at $1100.!! Needless to say I wasn't in the bidding.
I did pick up a Sioux 3/8" angle drill for bowl sanding.
I also got a 10 piece set of Lemco spindle chisels. They run from 3/8" to 11/4". Any info on the Lemco set would be great. I've tried the net but can't find much. The handles have LEMCO TOOL INC. Box 1664 Sedalia, MO. The blades have DIACCURATE TM the size 3/8 etc. and the pat. # U.S.PAT4345631. I don't turn a lot of spindles but for the price of less than one good bowl gouge I got a set of 10 hardly used spindle chisels!
Thanks, Skip

Skip. I have the same set of Lemco's, plus a couple of custom sizes.
I know the man that made those. He's been here at my shop. He lives an hour drive from me.

Short story on them, he sold the patent on those. The man who bought the patent, never did anything with it, then later died.

I've thought about reviving them and making them again, but, lack of time and money stops a lot of things sometimes.

[Ken Fitzgerald]

Skip, This may sound funny but I'm being serious.

It's been my experience if I'm selling stuff at an auction...everything goes at a lowball price....if I'm buying it goes way too high!

[Dick Strauss]

Skip,
I'm glad you didn't get caught up in the frenzy like the other folks did. That auction price almost reached new Jet 1642 territory.

I was at an auction where heavily used tools (like a 12" Delta lunchbox planer) went for more money than a new one. Then, at the same auction, I saw two round solid oak tables (3' coffee and 4' dining) go for under $20 each. The crazy thing is I think the tables were each made with $40 worth the lumber.

[Joshua Dinerstein]

Short story on them, he sold the patent on those. The man who bought the patent, never did anything with it, then later died.
Wow. Found the patent online and looked at the chisels. Pretty interesting design. Cool.

Joshua

[Bernie Weishapl]

You are going to like the angle drill for sanding for sure and the tools sound great. Auctions are funny. I have a delta planer I bought at a auction brand new. Never had a piece of wood go thru it. New price is $249. I got it for $35. Didn't need it but got it. At the same sale I got a delta bench top table saw. New was $189. I got it for $25 and it is like brand new. At the same sale I saw used and some well used drills and skill saws going for more than new. Go figure.

[Will Neds]

Skip. I have the same set of Lemco's, plus a couple of custom sizes.
I know the man that made those. He's been here at my shop. He lives an hour drive from me.

Steve,
As you may know by now, the man who invented the Lemco turning tools passed a few years back. His grandson (who grew up in Lemler's shop) has been on the hunt to find a set as a means of memorializing his grandpa. I've been brought in as a friend to assist, as I'm a little more savvy with digital networking. If you ever come across any more, would you please let me know?

Best,
Will

[Steve Clardy]

Steve,
As you may know by now, the man who invented the Lemco turning tools passed a few years back. His grandson (who grew up in Lemler's shop) has been on the hunt to find a set as a means of memorializing his grandpa. I've been brought in as a friend to assist, as I'm a little more savvy with digital networking. If you ever come across any more, would you please let me know?

Best,
Will

AJ Lxxxxx. Hadn't heard officially, but figured as much. Haven't seen/heard from AJ in a long time.
Seems I ran across the grandson on one of the forums........don't remember.
I know where there is another set. I tried buying them one other time. I'll check.
Steve

[Dave Fritz]

Would it be possible to post a photo of them or a link to a photo. I think woodturning has more one person shops than any other hobby I've ever done. Monster hollowing, Robust lathes, Thompson tools, D-Way etc.

[Stephen White]

Skip, This may sound funny but I'm being serious.

It's been my experience if I'm selling stuff at an auction...everything goes at a lowball price....if I'm buying it goes way too high!

Ha ha, so true and the guy who sold the one above probably thought $1100 was a steal for his Powermatic!

I still refer to the last kiln we bought a decade ago and 'the new one'.

[Will Neds]

Steve,

Any update on another Lemco set? If there is an easier way to communicate please let me know. I'm happy to publicly share the grandson's phone number :P

-Will

[Steve Clardy]

Steve,

Any update on another Lemco set? If there is an easier way to communicate please let me know. I'm happy to publicly share the grandson's phone number :P

-Will


Working on getting a price. This is a full set with the custom box.
I'll PM you (private message) when I get that. He hasn't said for sure if they are for sale.

[Will Neds]

Working on getting a price. This is a full set with the custom box.
I'll PM you (private message) when I get that. He hasn't said for sure if they are for sale.

I haven't found a Private Message inbox on this sawmillcreek forum. Only notifications which are linked to posts in public threads. So I thought I'd check back in and see if I missed anything from you regarding whether the Lemco set was for sale.
Thanks!

[Steve Clardy]

I haven't found a Private Message inbox on this sawmillcreek forum. Only notifications which are linked to posts in public threads. So I thought I'd check back in and see if I missed anything from you regarding whether the Lemco set was for sale.
Thanks!

Hi Will. No info yet as I haven't got him pinned down yet.
Steve

[Will Neds]

Hi again Steve. Rather than you being the middle man, would it be possible to share the contact information or address of the person with the Lemco set? The grandson still lives in the area and would be happy to meet with the owner to discuss a sale. Thanks!

[John Keeton]

Will, as a non-contributor you cannot access the private message function or email function. If you pay $6 and become a contributor that will give you access, permit you to see pics, access to the classified forum, etc.

[Steve Clardy]

Hi again Steve. Rather than you being the middle man, would it be possible to share the contact information or address of the person with the Lemco set? The grandson still lives in the area and would be happy to meet with the owner to discuss a sale. Thanks!


Tools are currently not for sale.

[Bruce McVeety]

466389Found this picture of a set on the web. https://sawmillcreek.org/blob:https://sawmillcreek.org/2fbd4e3c-d290-44dc-8f5c-06384d268a52