Rigid TS3660

[Nathan Schleicher]

Here's the story, I'm going to be moving soon, and will be getting a much better shop area. I'm planning on getting the TS3660. Can anyone tell me the measurments of the table?

Thanks,
Nathan

[Glenn Howard]

According to Home Depot's website...

Table Length : 23.50 In.
Table Width : 25.75 In.

[Jim O'Dell]

I'm wondering if those measurements are without the side tables. That seems awfully small. I'm know my 3612 is a full 27" deep. I'd be surprised if the 3660 was less than standard. I'm sure someone that has one here will clear this up for us. Jim.

[Art Moore]

Just did a quick measurement on my 3650 for you. The table is 27" deep. The main table is 20" wide, and with both wings installed the width is 44".

[glenn bradley]

You can find the owners manual here: http://www.ridgid.com/ASSETS/77A2C9E7C7D24C46AB2BD13C3B00F556/TS3660_179_%20eng.pdf

[Dave Sweeney]

These are the measurements of my 3612, the 3660's numbers can't be much different if any than these. These figures are what the saw measures fully assembled.

64½" = Measuring right to left
42" = Measuring from the front of the front rail to the back of the motor
40¼" = Measuring from the floor to the top of the blade guard/splitter

[Nathan Schleicher]

Thanks all. I appreciate it. Now I can start laying out my new shop on paper :)