PDA

View Full Version : Woven Polyethylene Fabric



Joe Pelonio
09-09-2008, 9:56 AM
This is probably a long shot, but does anyone know of a supplier of custom made 900 denier woven polyethylene banner blanks? The material used in Polly and Super Polly banners that are available off the shelf at sign supplies.

I need several pretty large sizes including one 6'x30' and have not found anyone that makes them that big, they seem to limit out at 4'x20'

Even uncut 6' material in a roll would work, I can get it sewn locally.

Doug Bergstrom
09-09-2008, 11:34 AM
Joe,
Custom Banner 800-926-7643 shows them in their catalog, Fellers has rolls up to 74", Gregory has some 13oz wide enough.

Joe Pelonio
09-09-2008, 3:40 PM
Thanks, Doug, I'll see if any of those can handle it.

Joe Pelonio
09-12-2008, 3:15 PM
It turns out that no one sells this material any more, it has not been very popular especially with the move to digital printing. In fact no one including Fellers seems to have an vinyl receptive material less than 10 oz vinyl except for Custom Banner. They have a polyethylene that's smooth, as used for beer banners at bars, 4 oz/yd which will work for this job. Amazingly it looks like they can sew them up and grommet them and get them to me in time so I don't have to do that part.


Thanks a lot Doug!:D