PDA

View Full Version : Air Assist Hose Size - Mini 24



Ron Thompson
09-08-2008, 12:01 AM
OK I've purchased a small air compressor with a tank that I'd like to hook up to my Epilog Mini 24.

What size hose do I need to purchase? I know the manual says 1/4", does that mean that the hose slides into the black 90 degree fitting on the back of my unit?

Ron

Frank Corker
09-08-2008, 4:36 AM
The little pipe with a 90 degree angle at the back yes. It just pushes in and it self grips the tube from the compressor.

Ron Thompson
09-08-2008, 10:53 AM
Thank you Frank,

As they say, a picture is worth 1,000 words.

Ron Thompson

Joe Pelonio
09-08-2008, 11:34 AM
I hope you can find a 3/8" to 1/4" reducer fitting. I ended up making my own using a piece of split hose, rigid tubing and some clamps.