Glue for mirrored arcylic and wood

[Mike Lush]

Hi all,

I've cut out some mirrored arcylic to use on an exterior sign and was wondering what the best adhesive was to use? Silicone, epoxy? Thanks for the advice.

Mike

[Joe Pelonio]

Many adhesives will dissolve some of the backing of mirror. There is a special adhesive made for mirrors that I use to adhere it to PVC board and other plastics, and should also work on wood. I get it at TAP plastics but it should also be available at any place that sells glass or mirrors. I have not looked for it at the borgs but I bet they have it. Look for mirror mastic or mirror adhesive.

[Frank Corker]

I'd go for Bostick - impact adhesive, where you coat both sides, leave it 15/20 mins and press in place.