45 degree bevel

[Joe Jetton]

It has been a long time, but somewhere I saw plans to build a table saw jig to cut 45 degree bevels (or cross cuts). Can any one lead me to a site where I might find plans for one.

Joe Jetton

[Eric Larsen]

I bought the metal miter sliders from Grizzly and they came with the plans.

I dislike wood sliders -- I always seem to have issues with them being too loose or too tight. Click the pic for the link...

http://www.grizzly.com/images/pics/jpeg288/g/g2866.jpg (http://www.grizzly.com/products/G2866)

[Joe Jetton]

Thanks Eric, but not quite what I'm looking for. I need to cut a 45 on small plywood panels to join them so as not to show the laminations of the plywood.

Joe

[Lee Schierer]

Here's one I found wiht a quick goolge search. Not sure if there is enough detail to make your own without buying hte book.Bevel jig (http://books.google.com/books?id=_1S6vom81b4C&pg=PA97&lpg=PA97&dq=45+degree+bevel+jig&source=web&ots=i3ArcJe89q&sig=PJjG43UkAsKzLguUzKs4QJ6u_z8&hl=en&sa=X&oi=book_result&resnum=10&ct=result)