Burt Alcantara
08-22-2008, 11:39 AM
I'm going to make a one drawer, one door floor standing cabinet 14x14x27 for a bathroom. To maximize usable space I'm thinking of using 5/8" ply if I can find it.
Will I have any problems if I glue a 1/8" or 1/16" shop made veneer over just the outside of the cabinet? I want to match the wood to a pedestal I made using QSWO and Leopard wood.
Having never made a cabinet before I'm open to all suggestions for everything - wood, joinery, glue, design, hinges, finish, the works.
Thanks,
Burt
Will I have any problems if I glue a 1/8" or 1/16" shop made veneer over just the outside of the cabinet? I want to match the wood to a pedestal I made using QSWO and Leopard wood.
Having never made a cabinet before I'm open to all suggestions for everything - wood, joinery, glue, design, hinges, finish, the works.
Thanks,
Burt