Cutting Techniques with Festool Saw and Table

[Rey Johnson]

I am an occasional visitor to Sawmill Creek and always enjoy the discussions here. In fact, I came across a post of mine from a few years where several members here helped me to get my shop off the ground.

I have put together some of the techniques that I use for a few different cutting operations using the Festool multifunction table and the TS55 saw.

Some of the techniques include:
- Narrow Cross Cuts
- Dadoes/Grooves/Rebates
- Coves
- Laps (half and cross)
- Tongues

The techniques and article can be found here: A Festool MFT/TS55 Retrospective (https://share.acrobat.com/adc/adc.do?docid=b50b18ed-f056-4f59-8735-e83b179804e1)

Here is my post from a few years ago where some of the folks here helped me with creating my shop. I got a chuckle out of it. here (http://www.sawmillcreek.org/showthread.php?t=22587)

My shop has come a long way since then, but was started with your help.

Feedback on the techniques are welcome.

Thanks
Rey