Thom Sturgill
08-09-2008, 8:38 PM
Here are pictures of my first face turning, a maple bowl that's 7 1/2" dia and 2 5/8" high. It was a little taller before it went flying:eek:
when I had it mounted in jumbo jaws to turn the tenon off the bottom. Luckily, enough was left that I was able to re-chuck it and turn the lip down a bit to clean up the slight damage. It was sanded to 2000 grit, oil varnish rubbed in to bring out the grain, and then sprayed with Deft lacquer and waxed.
when I had it mounted in jumbo jaws to turn the tenon off the bottom. Luckily, enough was left that I was able to re-chuck it and turn the lip down a bit to clean up the slight damage. It was sanded to 2000 grit, oil varnish rubbed in to bring out the grain, and then sprayed with Deft lacquer and waxed.