michael gallagher
08-05-2008, 11:41 PM
I picked up a few bowling ball pen blanks from a guy a week or two ago, and decided to spin one up to see what it wanted to become; here are two pictures of the results. Be gentle on your critique as it is only my second try at turning one of these acrylic / cast / whatever you call it (how about non-wood?) pen blanks. The guy who made the blank picks up bowling balls that are about to be pitched because they are cracked or chipped from his local bowling alley - he then cuts them into little chips with different colors and casts them.
One of the important lessons I learned on this project is to follow instructions - for a man, it is something I am trying to objectively apply each and everyday, but as we all know life is a struggle. The creator of this pen blank was kind enough to send me written instructions on the best way to turn this type of blank - I promptly skipped right over that part and went to the "how to finish the blank" section instead.
My mistake.
The instructions said to use the skew and take light, gentle cuts. Seeing as how I didn't read the directions, I whipped out the gouge to take that big 'ole blank down to the slimline kit I was going to put it on.
Did I mention it was a mistake not to follow instructions? Bowling ball parts were flying everywhere, that stringy white crap (stuff) flew all over: my hair, the back wall, my bandsaw, the shelf, the fan about 10 feet away, down through my shirt and into my underwear, etc.
But I am not here to talk about my underwear (I suspect that is another bulletin board site).
Since I got aggressive with the gouge, I immediately turned a HUGE divot in the top portion of the blank. Nothing like working on your reconstructive skills at the lathe on a Tueday night post-Tropical Storm Eduardo, as I didn't think the tried-and-true wood method of grabbing some shavings and applying generous amounts of CA glue would benefit the blank. That's why the top part is kind of straight in contrast to the curved portion of the bottom.
My photography sucks (some will argue my lathe skills do, too), but I am quite pleased with the bowling ball blank. It's as smooth as can be, and has a real shine in good lighting. Needless to say, I think I like these casting blanks, and I have been impressed with many of the pens I have seen created with original blanks - it seems like you're only limited by your imagination in casting. I also like the uniqueness of this blank - you sure won't find it at your local Rockler or Woodcraft!
Anyone see the article in the papers several months ago about the guy who turned a pen with a blank cast from cow manure?
Thanks for listening-
Michael
One of the important lessons I learned on this project is to follow instructions - for a man, it is something I am trying to objectively apply each and everyday, but as we all know life is a struggle. The creator of this pen blank was kind enough to send me written instructions on the best way to turn this type of blank - I promptly skipped right over that part and went to the "how to finish the blank" section instead.
My mistake.
The instructions said to use the skew and take light, gentle cuts. Seeing as how I didn't read the directions, I whipped out the gouge to take that big 'ole blank down to the slimline kit I was going to put it on.
Did I mention it was a mistake not to follow instructions? Bowling ball parts were flying everywhere, that stringy white crap (stuff) flew all over: my hair, the back wall, my bandsaw, the shelf, the fan about 10 feet away, down through my shirt and into my underwear, etc.
But I am not here to talk about my underwear (I suspect that is another bulletin board site).
Since I got aggressive with the gouge, I immediately turned a HUGE divot in the top portion of the blank. Nothing like working on your reconstructive skills at the lathe on a Tueday night post-Tropical Storm Eduardo, as I didn't think the tried-and-true wood method of grabbing some shavings and applying generous amounts of CA glue would benefit the blank. That's why the top part is kind of straight in contrast to the curved portion of the bottom.
My photography sucks (some will argue my lathe skills do, too), but I am quite pleased with the bowling ball blank. It's as smooth as can be, and has a real shine in good lighting. Needless to say, I think I like these casting blanks, and I have been impressed with many of the pens I have seen created with original blanks - it seems like you're only limited by your imagination in casting. I also like the uniqueness of this blank - you sure won't find it at your local Rockler or Woodcraft!
Anyone see the article in the papers several months ago about the guy who turned a pen with a blank cast from cow manure?
Thanks for listening-
Michael