View Full Version : Desk Sign from scrap Corian

Keith Outten
08-04-2008, 5:03 AM
Corian left over from other projects often makes a nice gift if you have the time to dedicate to using up your shop scraps. I've made these kinds of desk signs before and I really like the style. This one is an Azure Blue 6" disk with an Everest Corian base. The base was heated and then placed on a piece of ten inch PVC pipe as the bending jig. This is the first one of these that I installed a clock on the back.

Both pieces were cut on the ShopBot router. The disk was laser engraved and paint filled with gloss white Testors model paint.


Ron Dunn
08-04-2008, 7:05 AM
Something like that would make interesting table place-names, for weddings and other formal occasions. If you're making them from scrap it might be a good little earner.

Mike Null
08-04-2008, 7:26 AM

Nice design and use of material.