glass award supplier

[Craig Hogarth]

I'm looking for a glass award with a wave shape to it. There's a ton of acrylic shapes like this, but the customer wants glass. Any ideas?

[Bill W. White]

I'm not familiar with the acrylic wave you are refering to. Maybe you could post a picture of the acrylic award . I do a lot of glass fish cutouts maybe I could help you. Bill W.

[Craig Hogarth]

Something similar to this. She just wants the wavy edge, either on top or side.

http://www.jdsindustries.com/images/21c.jpg

[Bill W. White]

Craig, I can do the wavy edge for you but my beveling equipment is probably not good enough to do the straight edges, and give you a perfect polished edge, so if you can get a blank the size you want I would be happy to do the wavy edge for you. I will make a wavy edged piece tomorrow and see how good or bad it looks. Usually when I make the small trophies like this I sandblast the entire edge all the way around or make a chipped edge and grind off the sharp edges..always wanted to mix the polished edge with the sand blasted look so I guess this is my chance. Bill W.