JDS Laserable Aluminum

[Brian Robison]

Any one use this material? I've used the red and it lasers fine. The blue however needs to be lasered twice to clean up and the edges are not as crisp as I'd like to see.

[Mike Null]

Brian
I've used dark red and green and felt the results were very sharp.

[Brian Robison]

Hi Mike,
It may just be the blue for some reason.

[Matt Wheeler]

The blue seems to always leave a greenish haze. I use awardglo polish afterwards on almost every lacquered color plate. Works fantastic, cleans it up and resists fingerprints, etc.