Norm's Router Table - Fence Hardware

[Charles Wilson]

First off, I am aware of the hardware kit that I can buy from Rockler but am going to get the t track elsewhere, use a regular switch, and pick up the levelers at BORG so i can spend a little more on a plate with lift.

So, I am curious for those who have built the table what hardware I am going to need. If you could, type and quantities would be appreciated.

Chuck

[Mike Heidrick]

http://i39.photobucket.com/albums/e169/BloomingtonMike/list.jpg

[Mike Heidrick]

http://i39.photobucket.com/albums/e169/BloomingtonMike/list2.jpg

[Mike Heidrick]

That should be everything.

[Charles Wilson]

Mike,

Got the plans in front of me.

BUT . . . . .

Where it says "Hardware Kit" it isn't specific as to what hardware is needed for the fence.

Chuck

[Don Abele]

Chuck, the hardware kit is from Rockler (part #63010). It costs $84.99 and includes:



36” Miter Track
Switch with 24” pigtail
4 each 5/16” x 1-1/2” T-bolts
2 each 5/16” x 2-1/2” T-bolts
5/16 – 18 T-knobs
2 – 5/16–18 5 Star knobs
Dust Port
Plastic Levelers (set of 4)
5/16 –18 T-nuts (set of 8)
4” to 2-1/2” reducer


It's available here: http://www.rockler.com/product.cfm?Offerings_ID=10446&TabSelect=Details

Be well,

Doc

[Charles Wilson]

Thanks Don and Mike.

Chuck