View Full Version : Norm's Router Table - Fence Hardware
Charles Wilson
07-20-2008, 9:14 PM
First off, I am aware of the hardware kit that I can buy from Rockler but am going to get the t track elsewhere, use a regular switch, and pick up the levelers at BORG so i can spend a little more on a plate with lift.
So, I am curious for those who have built the table what hardware I am going to need. If you could, type and quantities would be appreciated.
Chuck
Mike Heidrick
07-20-2008, 9:58 PM
http://i39.photobucket.com/albums/e169/BloomingtonMike/list.jpg
Mike Heidrick
07-20-2008, 10:00 PM
http://i39.photobucket.com/albums/e169/BloomingtonMike/list2.jpg
Mike Heidrick
07-20-2008, 10:01 PM
That should be everything.
Charles Wilson
07-20-2008, 10:35 PM
Mike,
Got the plans in front of me.
BUT . . . . .
Where it says "Hardware Kit" it isn't specific as to what hardware is needed for the fence.
Chuck
Don Abele
07-21-2008, 12:10 AM
Chuck, the hardware kit is from Rockler (part #63010). It costs $84.99 and includes:
36” Miter Track
Switch with 24” pigtail
4 each 5/16” x 1-1/2” T-bolts
2 each 5/16” x 2-1/2” T-bolts
5/16 – 18 T-knobs
2 – 5/16–18 5 Star knobs
Dust Port
Plastic Levelers (set of 4)
5/16 –18 T-nuts (set of 8)
4” to 2-1/2” reducer
It's available here: http://www.rockler.com/product.cfm?Offerings_ID=10446&TabSelect=Details
Be well,
Doc
Charles Wilson
07-21-2008, 7:07 AM
Thanks Don and Mike.
Chuck
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.