PDA

View Full Version : Odd Size Wooden Trophy Bases



Brian Robison
07-17-2008, 8:17 AM
Any one out there make wooden bases for trophies?
I may need a few very quickly.:o

Kenneth Hertzog
07-17-2008, 8:30 AM
Brian

what size, type of wood, how thick
design needed and are you finishing it

could be able to do it depending on the above :rolleyes:

ken

Brian Robison
07-17-2008, 8:40 AM
Hi Ken, I need a quick and dirty quote. I think cherry would be fine. all 3.5 or 4 inches tall.
(4) 22 x 9
(1) 8.5 x 5.25
(1) 6 x 4

I think that's it.

Ray Mighells
07-17-2008, 2:59 PM
How thick; what kind of edge treatment? {Profile, radius, chamfer, straight/flat); What finish?

Craig Hogarth
07-17-2008, 3:16 PM
brian, what's going on the 22x9?

Brian Robison
07-17-2008, 4:02 PM
Hi Ray,
Nothing real fancy, something like a trophy base you'd find in the JDS catalog. Probably natural finish.

Craig,
It's a bronze horse statue that I'll need to engrave for an award. As it stands these don't have any place to put any engraving.

Kenneth Hertzog
07-17-2008, 6:22 PM
Sorry Brian
I have nothing that thick
ken

Ray Mighells
07-17-2008, 7:54 PM
I see perimeter dimensions. I do not see a thickness listed. Finish is lacquer, poly, oil, paint? How soon do you need them?

Bill W. White
07-17-2008, 9:20 PM
I've got some nice walnut that is 4 inches thick and could make them for you Got to warn you good wood that thick is very expensive. Bill W. 352 475 3400

Mike Null
07-17-2008, 10:30 PM
Brian

What about making the base of the base a flat 3/4" thick piece of wood and a platform of black acrylic. or make the whole thing of black acrylic.