View Full Version : Burgess Bit
Rich Konopka
07-16-2008, 12:36 PM
Does anyone have any experience with the Burgess bit set? How does it work with 3/4" or 11/16" plywood?
Thanks
Kelly C. Hanna
07-16-2008, 6:53 PM
I tried a set out on the client once and didn't care much for it. LOTS of tearout along the edge and inconsistent edge thickness. I imagine with Baltic Birch it might do an ok job, but with cabinet grade ply it wasn't a good edge.
Rich Konopka
07-17-2008, 8:09 AM
Thanks Kelly. I did see your post of about 3-4 years ago but the link to the review was gone.
Cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.