Wanted Made - Color name tags

[Pete Simmons]

Need to make some name tags 3 x 1.75

Laser engraved Rowmark type material (which I can do) with a small color logo in one corner (which I cannot do).

Would anybody be able to make the tag with the color work? If so how much?


PM is fine.

I would keep tags in stock and engrave the name as requested.

Maybe 100 - 300 units.

[Kenneth Hertzog]

Pete
what does the color tag look like
sent a PM
ken

[AL Ursich]

Here is 3 x 1.5 Unisub 5786 FRP Sublimated Plastic with Epoxy Dome on top.

AL

Name Tags and Fire Tags

[Mike Null]

If you want to engrave these as needed then you may want to try Johnson Plastic. They will cut the name tag and either screen print the logo or hot stamp it then you can engrave as required.

[Bill Cunningham]

I have had Permark foil stamp the multi coloured 'Molson' beer logo onto blank name badge plates, I then engrave the name, attach the pin, clip, or magnets.. They use the standard ABC discounts, and can do fairly intricate logos..
I also find reverse engraved plastic done in stages and colour filled in stages can allow some very intricate designs as well..