Rick de Roque
07-10-2008, 1:25 AM
It can be hard to get a good clamp on an angled glue up. As this picture of a cut off from a top curved(after some hand plane work) bed rail shows that a 5mm domino helped align the 3 parts as the clamp pressure was applied. The Domino's are not for strength, in this application, but helped with maintaining alignment during glue up. Made this long glue up soooo much easier. I was please with the results so I thought I would share my experience.
http://i4.photobucket.com/albums/y118/rd4212/woodworking%20stuff/festool.jpg?t=1215666979
Rick
http://i4.photobucket.com/albums/y118/rd4212/woodworking%20stuff/festool.jpg?t=1215666979
Rick