PDA

View Full Version : Hole in One trophy



Tim Baude
07-09-2008, 8:39 PM
Hi all,
I have a friend who has 3 hole in ones. He has a trophy for one, but would like a dual one for the other 2 as he got them very close together last summer. Does anyone know of a supplier? If I can't find a dual, I still need to find 2 for him. Any help would be great, or if someone can think of an alternative that would be great.

Tim

Craig Hogarth
07-10-2008, 1:11 AM
I believe JDS has the hole in one trophy figure. You should be able to mount two on a trophy

Tim Baude
07-10-2008, 6:11 AM
Thanks Craig,
I think they do also, but I guess I wasn't specific....I would like one that will hold the balls he used for the hole in ones. I am also trying to figure out maybe how to make one.....any help on either end would be great.
Tim

matt heinzel
07-10-2008, 9:34 AM
The hole in one from JDS does have a spot to hold the golf ball. We sell them at our store.

Stephen Beckham
07-14-2008, 3:12 PM
Tim,

I used the one Matt has displayed and put two verically on a plaque for a fella - put a plate in the middle with both dates, hole numbers and etc...

Edsel Emery
07-15-2008, 7:02 AM
I used the same one on a plaque with the scorecard underneath...lots of possibilities here.

Mike Null
07-15-2008, 7:07 AM
Same as Ed. I'm making one today with scorecard, ball and plate with info.

If it looks good I'll post it. My neighbor works for AB so I'm doing this for a case of beer.

Stephen Beckham
07-15-2008, 9:10 AM
Hey Mike - what's that amount of sales tax collected when paid in beer? Is it measured in Hops or Barley? :D

Could you imagine that? If you stated "If I had a beer for every donated plaque/trophy..."

Mike Null
07-15-2008, 10:34 AM
No tax on favors but I hope I collect before he gets laid off. He is currently on their free beer program.

Mike Null
07-16-2008, 10:16 AM
Here's the plaque. 11 x 15 solid walnut. Brass plate has been laser sublimated.

Tim Baude
07-16-2008, 10:45 AM
Looks great Mike,
Can I ask how you attached the golfball? I couldn't tell from the picture.
Thanks
Tim

Mike Null
07-16-2008, 12:51 PM
That is 5 minute epoxy. I drilled a 3/4" diam. recess 1/8" deep in the plaque.

I tried Weld Bond but it wouldn't set up.