Craig D Peltier
07-02-2008, 6:43 PM
The cheap 36" slides got held up on slow boat from china an customs. They were $20 a piece.
Now I have a draw 1/2 baltic birch sides and bottom 36 long x 18 wide with a 3/4 face of maple ply an half inch shaker maple border by 2 wide.They might weight 25-30lbs.
Client wants to store shoes in them in a deep closet. All the slides that long except from bold hardwares site are over $125 each cause they are rated 3-500lbs.
I can get 30s for around $50 that will hold 150lbs. Do you think this is a bad idea , I understand they will only slide out 30 inches if there full extension.
Now I have a draw 1/2 baltic birch sides and bottom 36 long x 18 wide with a 3/4 face of maple ply an half inch shaker maple border by 2 wide.They might weight 25-30lbs.
Client wants to store shoes in them in a deep closet. All the slides that long except from bold hardwares site are over $125 each cause they are rated 3-500lbs.
I can get 30s for around $50 that will hold 150lbs. Do you think this is a bad idea , I understand they will only slide out 30 inches if there full extension.