Brian Robison
06-27-2008, 1:22 PM
Hi Creekers,
Ya'll are so savvy you probably already figured this out, but I'm not as smart as you!:rolleyes:
I like the center to center feature but once you shut off the laser you lose the setting. I figured out that if you disable the X and Y and move the red dot over the center of the piece your engraving, the control panel tells you your location (sort of). I move my text / logo by boxing it to the location where the laser X and Y said the center of the engraving area is and Viola. It's now repeatable after you turn off the laser by not using the center to center feature.
Ya'll are so savvy you probably already figured this out, but I'm not as smart as you!:rolleyes:
I like the center to center feature but once you shut off the laser you lose the setting. I figured out that if you disable the X and Y and move the red dot over the center of the piece your engraving, the control panel tells you your location (sort of). I move my text / logo by boxing it to the location where the laser X and Y said the center of the engraving area is and Viola. It's now repeatable after you turn off the laser by not using the center to center feature.