Router Bit Help

[Scott Mann]

Does anyone know where i can find a V groove router bit that cuts a 60* angle? I can find some that cut 45* and 30*. I am making a small molding piece to cover some 30* miters that opened up. I tried doing it on the tablesaw, but the peices are so small that it's a little scary. Thanx in advance for the help.

[Anthony Whitesell]

Try Rockler. I believe the signcrafter (replacement) bits are 60*.

[Prashun Patel]

You can still do it on the tablesaw. Try cutting your 60 degree angle FIRST, and then ripping the narrow piece, keeping the cutoff part of the stock on the fence side of the blade.

[Jerome Hanby]

The bits that Beall supplies for his wood threader might be 60 degrees

[Lee Schierer]

Sears used to carry a 60 degree bit for their router crafter. Try routerbitworld.com They have a great selection of router bits.

[glenn bradley]

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_sign.html#Sign_Lettering_Anchor

[Scott Mann]

Thanxs for all the quick responses, i really appreciate it.