Alan Arnup
06-22-2008, 7:36 PM
Hi to all,
This is my first time on the site for a
while. I have been trying out my new Woodfast
M305 midi lathe which I recently purchased.
These items are made from Australian Blackwood
scraps that I had in the shed. I deliberately
saved the worm hole in the bowl on the left.
The lidded box on the right was my first attempt
at making one. It is a little shallow but the
lid fitted just great.
Alan
_____________________________________
You can't teach an old mouse new clicks.
This is my first time on the site for a
while. I have been trying out my new Woodfast
M305 midi lathe which I recently purchased.
These items are made from Australian Blackwood
scraps that I had in the shed. I deliberately
saved the worm hole in the bowl on the left.
The lidded box on the right was my first attempt
at making one. It is a little shallow but the
lid fitted just great.
Alan
_____________________________________
You can't teach an old mouse new clicks.