Brett overhead guard

[Roy McQuay]

Can someone tell me how the Brett guard is attached to the saw. I bought this on ebay about 2 years ago and it sat in my shop for a long time before I opened it. There was no manual and I have figured how everything works except for how and where to attach the heavy C-arm to my saw. I have a Jet Supersaw with 50" cut. I am sure something is missing.

[Jamie Buxton]

Here's what HTC offers in the way of owners manuals. They aren't great, but maybe they'll help.
Look at the one for your particular guard, and at the one titled Brett-Guard Parts. That may help answer the question about whether you have everything.

http://www.htcproductsinc.com/manuals.html

[Roy McQuay]

Thanks Jamie, I have the cantilever guard and when I clicked on that, it only shows a one page manual. The picture shows the guard mounted on top of the extension table and away from the edges. I am sure it has to be mounted under the table but I don't know how. There are no holes in the arm base, which make me think there is a part missing that this mount slides on to. I am still confused.

[Doug Jenkins]

The one I had mounted to the back rail of my biesemeyer fence (L shaped)