View Full Version : Basic Bottle Stopper Question
Steve Mellott
06-12-2008, 8:47 PM
I would like to turn some bottle stoppers, but they seem to come in 3 different styles: chrome, cork and silicone. Is one style better at sealing the bottle than the other two? Any other advantages to choosing one over the other two? Thanks.
Greg Cuetara
06-12-2008, 8:53 PM
If you are looking for really good stoppers I have heard that these are the best out there...
http://www.torne-lignum.com/stoppers.html
I have not used them yet but they are on my list to try out. I read somewhere where someone put a bottle on its side on their display to show it was leakproof.
I have not had much luck yet turning stoppers but hopefully that will change soon.
Good Luck,
Greg
Ron McKinley
06-12-2008, 9:01 PM
I make a lot of bottle stoppers and give them away to friends and family so I use the silicone stoppers which are cheap enough to give away, are effective and have a long life.
Here's the way I do them: http://inlandwoodturners.org/pages/BottleStoppers.pdf
If I were selling them I would use Ruth Niles stainless steel stopper at about $5 per copy.
Corks dry out and don't last long but are probably the cheapest. ......Ron
curtis rosche
06-12-2008, 9:04 PM
what good is a bottle of wine with a cork in it? just drink it now and open another later
Robert McGowen
06-12-2008, 9:07 PM
If you are looking for really good stoppers I have heard that these are the best out there...
http://www.torne-lignum.com/stoppers.html
I have turned about 20 of the above stoppers and I have to agree with the quote.
Steve Mellott
06-13-2008, 12:22 PM
Thanks for the advice. I think I will try the Ruth Niles' stainless steel stoppers as well as several silicon stoppers. Thanks agian!
Halsey MCCombs
06-13-2008, 7:09 PM
I have found Ruth's stoppers of fine quality. Halsey
Wes Henson
06-14-2008, 12:28 AM
Also if you use cork it can pick up the color from a red wine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.