Douglas Brummett
06-11-2008, 4:08 PM
Okay, scored a heck of a deal on a delta JT360 floor model at Lowe's. it was without the knives or hardware. No big deal, I found several vendors for most parts prior to committing to purchase.
Well, I only found the knife screws at one vendor. After placing my order I received notice that they don't actually have the screws :mad:
Problem is that nobody has the screws and they are back ordered at Delta/BD/Dewalt until august :rolleyes:
At this point I can stop, return the other parts, and just go to a Sunhill spiral head. I would have to suck up the $50 in shipping to do so, but this may be the best solution.
Does anyone know what the knife screws are for this jointer? All documentation seems to be intentionally lacking. Any help greatly appreciated. I will paypal you money for a beer if you take the time to pull a screw from your jointer and actually measure it :D :D :D
Well, I only found the knife screws at one vendor. After placing my order I received notice that they don't actually have the screws :mad:
Problem is that nobody has the screws and they are back ordered at Delta/BD/Dewalt until august :rolleyes:
At this point I can stop, return the other parts, and just go to a Sunhill spiral head. I would have to suck up the $50 in shipping to do so, but this may be the best solution.
Does anyone know what the knife screws are for this jointer? All documentation seems to be intentionally lacking. Any help greatly appreciated. I will paypal you money for a beer if you take the time to pull a screw from your jointer and actually measure it :D :D :D