Need suggestions for cabinet door design

[Dave Westover]

Im about to start on a bath vanity and my wife decided we want a v groove panel look. Im planning on just doing tongue and groove stiles and rails on the tablesaw, but I thought I might be able to add some type of profile to the inside edges of the stiles and rails. A small chamfer the same size as the v groove might look nice, but Im not sure what to do with the outside edges of the door. Leave it square? Repeat the chamfer? Any suggestions?

Also, does anyone know of a site that has examples of door profiles and panels or pictures of different combinations of profiles and panels.

Thanks

[Mitchell Andrus]

http://images.google.com/images?sourceid=navclient&ie=UTF-8&rls=GGLD,GGLD:2004-35,GGLD:en&q=cabinet%20doors&um=1&sa=N&tab=wi

Have at it.

[Chris Padilla]

Dave,

The best thing to do is to make small samples so you can turn it around in your hands, step back and look it from various angles. Maybe even stain it or paint it what you think you want.