View Full Version : Heres the lathe i am getting, any thing i should know?(Third try, now it should work)
curtis rosche
06-01-2008, 8:17 PM
heres the lathe i am getting, its a craftsman. is there anything i should know about this before commiting 100% to it?
heres the link to the picture http://i132.photobucket.com/albums/q36/bigredc222/c-manlathe.jpg
curtis rosche
06-01-2008, 8:37 PM
also, anyone have any spare motors laying around?
Bruce Pennell
06-01-2008, 10:25 PM
Curtis can't see your pic?
curtis rosche
06-02-2008, 7:17 AM
i dont know why it wont show, i cant fix it at school either, ill try to fix it tonight
robert hainstock
06-02-2008, 7:29 AM
Yoou most likely know this, but any pix posted needs to be under 107kb. you can download the pixresizer free. I then usually use the 25 percent setting, and save too shared picture file. Good luck. If thatis a Craftsman mono or two tube lathe, A 1/3 Hp motor will make lots of spinny things. :)
Bob
curtis rosche
06-02-2008, 10:32 AM
its not a tube lathe!!!!!!
i guess its probably the size, i just copied and pasted, i will see if i can resize it
curtis rosche
06-02-2008, 10:43 AM
heres where i got the picture from, you should be able to see it here. its the 9th post down
http://www.owwm.org/viewtopic.php?t=39299&postdays=0&postorder=asc&start=15
Bruce Pennell
06-02-2008, 10:57 AM
Curtis you have to log in to see your pic?
curtis rosche
06-02-2008, 11:10 AM
grrr, internet is stupid
curtis rosche
06-02-2008, 1:56 PM
it works now
Steve Busey
06-02-2008, 2:16 PM
>> It works now
Not for me... :(
curtis rosche
06-02-2008, 2:30 PM
what does it do when you click the link? i dont know, i am at school and all image sites are blocked
Jack Mincey
06-02-2008, 2:37 PM
Curtis,
This is the only site I can use at school to host pictures. Maybe it will work for you?
Jack
http://www.imagecave.com/index.asp
Paul Engle
06-02-2008, 2:39 PM
Once you get to the login page up above has a menu bar - clikc on pic's-clikc onf recent submissions then down about 8 or 9 lines , it is submitted by the seller not Curtis....
Bruce Pennell
06-02-2008, 3:22 PM
Curtis copy or save as, than resize the photo. You still need to log in to see it.
curtis rosche
06-02-2008, 3:28 PM
may be this will work,
Andrew Derhammer
06-02-2008, 3:45 PM
Curt, make sure that the pic is still on your photobucket account and try recopying the img code.
curtis rosche
06-02-2008, 5:55 PM
forget it. i have a new idea instead of this little lathe. i will update on idea later
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.