Heres the lathe i am getting, any thing i should know?(Third try, now it should work)

[curtis rosche]

heres the lathe i am getting, its a craftsman. is there anything i should know about this before commiting 100% to it?


heres the link to the picture http://i132.photobucket.com/albums/q36/bigredc222/c-manlathe.jpg

[curtis rosche]

also, anyone have any spare motors laying around?

[Bruce Pennell]

Curtis can't see your pic?

[curtis rosche]

i dont know why it wont show, i cant fix it at school either, ill try to fix it tonight

[robert hainstock]

Yoou most likely know this, but any pix posted needs to be under 107kb. you can download the pixresizer free. I then usually use the 25 percent setting, and save too shared picture file. Good luck. If thatis a Craftsman mono or two tube lathe, A 1/3 Hp motor will make lots of spinny things. :)
Bob

[curtis rosche]

its not a tube lathe!!!!!!

i guess its probably the size, i just copied and pasted, i will see if i can resize it

[curtis rosche]

heres where i got the picture from, you should be able to see it here. its the 9th post down

http://www.owwm.org/viewtopic.php?t=39299&postdays=0&postorder=asc&start=15

[Bruce Pennell]

Curtis you have to log in to see your pic?

[curtis rosche]

grrr, internet is stupid

[curtis rosche]

it works now

[Steve Busey]

>> It works now

Not for me... :(

[curtis rosche]

what does it do when you click the link? i dont know, i am at school and all image sites are blocked

[Jack Mincey]

Curtis,
This is the only site I can use at school to host pictures. Maybe it will work for you?
Jack
http://www.imagecave.com/index.asp

[Paul Engle]

Once you get to the login page up above has a menu bar - clikc on pic's-clikc onf recent submissions then down about 8 or 9 lines , it is submitted by the seller not Curtis....

[Bruce Pennell]

Curtis copy or save as, than resize the photo. You still need to log in to see it.

[curtis rosche]

may be this will work,

[Andrew Derhammer]

Curt, make sure that the pic is still on your photobucket account and try recopying the img code.

[curtis rosche]

forget it. i have a new idea instead of this little lathe. i will update on idea later