View Full Version : Multiple Copies

T Nguyen
05-29-2008, 1:29 PM
Is there a way to make multiple copies? I'm currently cutting ABS and it takes 3 passes to cut through it. So i have to stand here and press the "start" button 3 times. If i could make multiple copies it would elimnate the need for me to manually press the start button 3 times. It would be great because I'm cutting 55 ABS pieces. I have a ULS m-360 settings are 100 pwr, spd 2.5 and ppi 1000. I appreciate any help.

Darren Null
05-29-2008, 1:38 PM
If it supports manual, different colour settings, you could have the same job in Corel; overlaid 3 times in different colours, with the 3 colours all set to the same power/speed settings. That'd work.

Steve McKee
05-29-2008, 1:40 PM
Highlight the object then press the + sign on your keyboard, this will duplicate the object without off-setting it. You will need to press + 2 times to have 3 copies.

T Nguyen
05-29-2008, 1:57 PM
You guys rock! That worked perfectly! You guys deserve a cold beer!