Another Awesome Dovetail

[David Shively]

Hey Guys I saw the post a little while back about A Tenon saw by Andrew at eccentric toolworks so I thought I would post my gem-A dovetail saw. I have to say this say has not only made my work better but much much faster. Mine has a custom cherry tote-Andrew was kind enough to make a prototype and send it to me for fit before completing. The brass back was etched to a custom spec and let me tell you no picture does this saw justice-its way to pretty. I didnt want to use it at first but after I tried it once I realized as pretty as it is the cut is way better! here are the specs.

Cherry tote
Etched brass back
10" saw plate .018" thicks
Very minor set-its perfect imo
16ppi cuts fast and smooth
and a touch of rake

I will add some better pics in a day or two when I get my new cam. http://img152.imageshack.us/img152/2341/img3668ft1.jpg

[Ray Gardiner]

Beautiful saw, congratulations on acquiring a fine tool.

It always seems to me that good tools always inspire good work.