PDA

View Full Version : Motorcycle parts!



Phil Salvati
05-19-2008, 2:45 PM
I guess I should say hello first....We have been lurking for a while....great information here to say the least!

I have been experimenting with our laser for sometime on chrome with Thermark.

In this instance we didn't have much luck because of the dome in the cover. Some areas stuck well when others just rubbed off with a rag. Temperature changes due to the arch is what killed me.

We changed ideas and had the part anodized and etched the designs with a low power. The small cover was easily done, the rear has the five military branch logos as well as a eagle head. IT took 9 hours to complete but it looked good.

BTW.... The bike won the competition in Missouri this past weekend too!

http://www.redearthdsigns.com/primary_cover3.jpg

Frank Corker
05-19-2008, 3:04 PM
Congratulations on winning your competition there Phil, the designs look great on the bike.