What's this material?

[Brian Robison]

I saw this on You Tube.
Can anyone tell me what the material is?
http://www.youtube.com/watch?v=DBjYF0d0bLM

[Joe Pelonio]

Looks like Rowmark Brushed Aluminum.

[Joe Hayes]

I agee with Joe. It is some brand of engravable plastics, it might be the thin Flexi-Brass from Rowmark.

[Frank Corker]

I think it's that too, whoever is doing it is cutting with way too much power though, it's curling the edges up by the cutline.

[Brian Robison]

Yes that must be it, bad part is I use that material all the time! It just looks really thin, I use the 1/16 and the 1/8.
What can I say, I'm not used to being up that late:D

[Scott Shepherd]

It is thin- .020". Works great for business cards.

[Mike Null]

I use a lot of .030" IPI brushed silver that looks a lot like that.

[Rob Bosworth]

My first thought when watching the video was, looks like he could use some fine focus adjustment. Look how wide the cut lines are on his part. IF they focused the beam better, they could use less power and have less heat affected zone.