Gordon LaVere
04-27-2008, 4:09 PM
I picked up a Walker_Turner 8" table saw It was sold as a Craftman circa 1940.
For a 8" table saw it is a solid and heavy little dude. It came of a 2X6 junk table that I have removed. The motor is a Delta 1/3 hp Repulsion/ Induction and that is in very good shape. The reason I bought it was only for the Miter gauge for my current saw. After I got it home and dusted it off and I'm thinking it is better than my current 8" saw. After restoration or just cleaning I'll see. Oh, yes it cost $15.00 total
http://farm3.static.flickr.com/2175/2443536827_edcff2ddf5.jpg?v=0
http://farm3.static.flickr.com/2319/2443412361_2807510f22.jpg?v=0
http://farm3.static.flickr.com/2024/2443411979_63ef13fa37.jpg
The motor is half cleaned and I'll paint tomorrow
For a 8" table saw it is a solid and heavy little dude. It came of a 2X6 junk table that I have removed. The motor is a Delta 1/3 hp Repulsion/ Induction and that is in very good shape. The reason I bought it was only for the Miter gauge for my current saw. After I got it home and dusted it off and I'm thinking it is better than my current 8" saw. After restoration or just cleaning I'll see. Oh, yes it cost $15.00 total
http://farm3.static.flickr.com/2175/2443536827_edcff2ddf5.jpg?v=0
http://farm3.static.flickr.com/2319/2443412361_2807510f22.jpg?v=0
http://farm3.static.flickr.com/2024/2443411979_63ef13fa37.jpg
The motor is half cleaned and I'll paint tomorrow