Matt Ocel
04-26-2008, 4:25 PM
I'm getting ready to head to the workshop and build a mitre box station.
Any critical dimensions or handy tips would be greatly appreciated.
I'm going to build the carcass out of 3/4" oak ply and edge band end grains with 1x oak.
It will be mounted on a 8' long table.
It will have a Norm A. flavor exept the wings will be permanent, I also like the idea of having pidgeon holes below the wings.
Any critical dimensions or handy tips would be greatly appreciated.
I'm going to build the carcass out of 3/4" oak ply and edge band end grains with 1x oak.
It will be mounted on a 8' long table.
It will have a Norm A. flavor exept the wings will be permanent, I also like the idea of having pidgeon holes below the wings.