infinity 735 blades

[cecil rolfe]

I put on a new set of Infinity blades and planed 30 Bf of hard maple and the blades are full of nicks, some 1/8 inch wide. The boards were clean and rough planed. I took cuts of 1/16 and 1/32 and the nicks showed up in the first board. I have been getting 200-300 BF of maple, cherry and red oak on my Dewalt blades. I've had the planer 4 years and this is the worst blade life I've had.

[glenn bradley]

From what I've heard about Infinity, they will stand behind their product. 1/16th is quite a bite in hardwoods for a lunchbox but still, there's a problem with those knives and I imagine they will make it right.