View Full Version : 3" Beall Bowl Buff Thread Size
Fred Conte
04-23-2008, 2:57 PM
I called Beall but they couldn't tell me the thread count on their 3" bowl buffs, also how long is the bolt? I was told they're 3/8" but nothing else.
Thanks!
Fred
Jared Schultz
04-23-2008, 4:33 PM
3/8" x 16 TPI
...and I just talked to someone at Beall a week ago that knew the answer.
Not sure about bolt length off hand, but I can check.
Clem Wixted
04-23-2008, 4:36 PM
I am in the process of making a knockoff of the Beall system and have a Beall Morse headstock adapter.
The bolts I bought were 3/8-16 and they fit the Beall adapter.
Clem
Fred Conte
04-24-2008, 7:04 AM
Thank you for the info, I made a stand alone buffer and need to drill and tap the aluminum extension but didn't know the tap size and depth I should go.
87101
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.